23
Default Menu
—The default menu will appear when
you insert the key into the console or when you
press the Home button. Press the Enter button
repeatedly to select the manual main screen or the
iFit screen as the default menu.
Firmware Update
—
For the best results,
regularly check for firmware updates.
Note: The matrix will display NOT CONNECTED if
the console is not connected to a wireless network.
Press the Enter button to check for firmware
updates using your wireless network. If an update
is available, the update will begin automatically.
IMPORTANT: To avoid damaging the incline
trainer, do not turn off the power while the firm-
ware is being updated. The update may take
several minutes.
Note: Occasionally, a firmware update may cause
your console to function slightly differently. These
updates are always designed to improve your exer-
cise experience.
Default Settings
—To restore the console to its
factory default settings, press the Enter button.
Note: The console will erase any information that
you have saved in its memory.
The
IP Address
option will display the console’s IP
address.
The
WiFi–Normal
option will allow you to set up
a wireless network connection using the console.
See step 4 for instructions.
The
WiFi–WPS
option will allow you to set up
a wireless network connection using your WPS
router. See step 5 for instructions.
The
WiFi–Advanced
option will allow you to set up
a wireless network connection using your com-
puter, smart phone, tablet, or other Wi-Fi device.
See step 6 for instructions.
Connect to iFit Account
—To set up a different iFit
account, but maintain the existing wireless connec-
tion, follow the instructions in the matrix.
Note: This option will rarely be used.
Clear WiFi Setting
—To erase the console’s
wireless network settings and have it forget the
currently selected wireless network, follow the
instructions in the matrix.
Contrast
—To adjust the contrast level of the
display, press the Incline increase and decreas
buttons.
4. Use WiFi–Normal to set up a wireless
connection.
This option will allow you to set up a wireless net-
work connection using the console.
Note: You will need to know your network name
(SSID). If your network has a password, you will
also need to know the password.
To set up a wireless network connection using the
console, first press the Enter button.
Next, set the
included WiFi
setup card on
the console.
The buttons
on the WiFi
setup card are
referenced in
the following
instructions.
A list of networks will appear in the matrix. Press
the up and down buttons to highlight the desired
network. Then, press the Enter button. Note: Do
not select IFIT_SETUP.
Note: The time display will show the number of
the currently-selected access point. The distance
display will show the total number of access points
detected.
If the network has a password, enter the password.
A keyboard will appear in the matrix. As necessary,
press the buttons on the WiFi setup card to select
the caps option, the number option, or the symbol
option.
Card
Summary of Contents for 24927.0
Page 5: ...5 ...
Page 6: ...6 all STANDARD SERVICE PLANS ...
Page 32: ...32 NOTES ...
Page 33: ...33 NOTES ...
