12
77
77
8. If necessary, move the incline trainer to the
desired location (see HOW TO MOVE THE
INCLINE TRAINER on page 26).
After the incline trainer is placed in the location
where it will be used, make sure that the incline
trainer rests firmly on the floor. If the incline
trainer rocks even slightly, turn the Leveling
Feet (77) as needed until the rocking motion is
eliminated.
8
9.
Make sure that all parts are properly tightened before you use the incline trainer.
Keep the included hex
keys in a secure place. One of the hex keys is used to adjust the walking belt (see page 28).
To protect the
floor or carpet from damage, place a mat under the incline trainer.
7. Slide the Right Inside Upright Cover (70) against
the lower end of the right Upright (83). Press
the Right Outside Upright Cover (71) against
the Right Inside Upright Cover until it snaps
into place.
Make sure that the wires are not
pinched.
Attach the Left Inside Upright Cover and the
Left Outside Upright Cover (not shown) as
described above.
Note: There is not a wire on
the left side.
7
70
71
83
Wires
Summary of Contents for 24927.0
Page 5: ...5 ...
Page 6: ...6 all STANDARD SERVICE PLANS ...
Page 32: ...32 NOTES ...
Page 33: ...33 NOTES ...
