Nordic AH4P Series, Service Manual

Page: 15 / 30

5-Jul-2022 Page 15 002596MAN-01
Startup Record: AHW/AH4P-Series
Installation Site
Startup Date Installer
City Company
Province Model
Country Serial #
Client Name Client Phone #
Check boxes unless asked to record data. Circle data units.
PRE-START INSPECTION
Ductwork Ductwork is completed, dampers/ diverters are adjusted
Registers are open and clear of objects
Air filter and end cap are installed
Condensate Drain is connected, properly vented and free of debris
Plenum heater is securely fastened (if applicable)
Hydronic Loop All shut-off valve are open (full flow available)
Loop is full and purged of air
Antifreeze type (if applicable)
Antifreeze concentration % Volume % Weight
Loop static pressure psi kPa
Electrical High voltage connections are correct and securely fastened
Circuit breaker (or fuse) size and wire gauge for air handler A Ga.
Circuit breaker (or fuse) size, wire gauge, and Plenum Heater size A Ga. kW
Low voltage connections are correct and securely fastened
STARTUP DATA
Preparation Voltage across L1 and L2 VAC
Heating Mode
(10 minutes)
Duct Return, Duct Supply, and Delta T In Out °F °C
Water In, Water Out, and Delta T In Out °F °C
Fan (black wire) current A
Fan shuts off and zone valve closes (if applicable) Fan Off Valve Closed
Cooling Mode
(10 minutes)
Duct Return, Duct Supply, and Delta T In Out °F °C
Water In, Water Out, and Delta T In Out °F °C
Fan shuts off and zone valve closes (if applicable) Fan Off Valve Closed
Date: Installer Signature: Client Signature:
A total of three copies are required, one for the homeowner, one for the installer and on to be sent to Maritime Geothermal Ltd.