background image

28 |  nORD eLeCTRO 6 useR MAnuAL Os v2.6x

Range: Roland EV7 (default), Yamaha FC-7, Korg, Fatar/Studiologic 

GAIn

This setting allows for adding some gain to the pedal signal. This can be 
useful if an attached pedal does not reach its maximum level or setting.

Range: 1 - 10

10 - LOCAL COnTROL

MIDI Local Control determines if the nord electro 6 keyboard and panel 
will control internal sound engines and programs or only transmit MIDI. 
Local Control 

On

 is the normal “play mode”. When Local Control is in 

Off

 

mode, front panel and keyboard actions are transmitted via MIDI only.

Range: On (Default), Off

 

M

Local always defaults back to “On” every time the Nord Electro 6 is 
powered on

11 - CHAnneL

GLOBAL

This sets the transmitting and receiving MIDI channel for the Global 
Channel. The Global Channel transmits all keyboard, pedal and panel 
actions as MIDI signals. It can also be used as a receiving channel with 
full control of the entire electro 6. 

Range: 1-16, Off (Default 1)

exTeRnAL KBD

This sets the channel for receiving MIDI from an external keyboard when 
using the “external KBD to Lo” function - see page 18.

Range: 1-16, Off (Default 16)

12 - COnTROL/PROGRAM CHAnGe MODe

CC (COnTROL CHAnGe)

This allows you to set if you want your nord electro 6 to transmit and/or 
receive MIDI Controller Messages or not on the Global channel.

Range: Off, Send, Receive, Send & Receive (Default)

PC (PROGRAM CHAnGe)

This setting determines whether your nord electro 6 transmits and/or 
receives MIDI program Change Messages, on the Global channel. 

Range: Off, Send, Receive, Send & Receive (Default)

13 - TRAnsPOse MIDI AT

When set to 

In

, active transpose values (global and/or set per program) 

are 

not

 applied to outgoing MIDI, but only to incoming MIDI data. In 

Out

 

mode sent MIDI notes are transposed but not incoming ones.

Range: In (Default), Out

14 - MIDI OuT veLOCITY CuRve

There are three options for how the velocity of outgoing MIDI notes is 
scaled. When set to 

Heavy

, the generated MIDI corresponds to the dy-

namic range of the nord electro 6 Piano engine, and this setting should 
be used when playing the nord electro 6 in Local Control “Off” mode 
from the local keyboard. The 

Medium

 and 

Light

 curves require increas-

ingly less effort to generate higher velocity values.

Range: Heavy (Default), Medium, Light

 

E

A dash, “-”, is shown when MIDI Out Velocity Legacy mode is set 
to “On”, as these curves are then not applicable.

15 - MIDI OuT veLOCITY LeGACY

set this to “On” if the MIDI Out (and its corresponding MIDI In) velocity 
curve of the previous Os version (v2.5x) should be used. This could for 
instance be useful to achieve expected results when playing back a MIDI 
file created with that version. 

Range: Off (Default), On

16 - veRsIOn AnD MODeL InFO

The version and model info menu page shows the full version number 
of the currently installed Os (Operating system) and, when turning the 
Program dial, hardware information for the instrument.

Use the Program dial to switch between Version and Model info

sOunD Menu

1 - PIAnO sTRInG Res LeveL

sets the level of the string Resonance feature that can be turned on for 
selected pianos (acoustic Med, Lrg and xL sizes).

Range: +/- 6 dB (0 dB default)

2 - B3 ORGAn TOneWHeeL MODe

sets the level of tonewheel crosstalk and cable leakage artifacts of the 
B3 organ model.

Range: Clean, Vintage 1 (default), Vintage 2

3 - B3 ORGAn CLICK LeveL

This sets the level of the Key Click for the B3 organ model.

Range: Low, Normal (default), High 

4 - B3 ORGAn KeYBOARD TRIGGeR POInT

This setting allows for changing how the nord electro 6 keyboard trig-
gers the B3 sound. When “High” is selected, it will be triggered before 
the key is fully depressed, which is more similar to how a real B3 works.

Range: High, Low (Default)

5 - ROTARY sPeAKeR

There are two available settings for the 122 Rotary speaker. With the 
122 setting the “virtual microphones” are placed further away, while with 
122 Close they are placed closer to the cabinet.

Range: 122 (Default), 122 Close

6 - ROTARY BALAnCe

This parameter determines the sonic balance, expressed as a percent-
age, between the bass rotor and the treble horn of the Rotary speaker.

Range: 70/30, 60/40, 50/50 (default), 40/60, 30/70

Summary of Contents for Electro 6





































Reviews: