background image

14 |  Nord ElEctro 6 UsEr MaNUal os v2.6x

5

 

PIaNo

oN/oFF, lEvEl aNd ZoNE sElEct

the Piano section is turned on or off by pressing its 

ON/OFF

 button. the 

LEVEL

 knob controls the volume of the Piano sound.

Press 

ZONE SELECT

 (shift + on/off), to assign the Piano to one or both 

of the two keyboard zones. the 

KBD ZONE

 lEds indicate the zones to 

which the Piano section is assigned. read more about split set-ups on 
page 17.

octavE UP/doWN

Use 

OCTAVE UP/DOWN

 to transpose the Piano section up or down by 

octaves (+/- 12 semitones). When assigned to the entire keyboard it can 
be transposed one octave up or down. When assigned to only one zone 
the available transpose values will vary, but always provide access to the 
entire range of the Piano.

sUstPEd aNd ctrlPEd

SUSTPED

 (shift + octave Up) activates any attached sustain pedal for 

the Piano section. read more on how to configure an attached pedal in 
the Menus chapter, on page 27.

CTRLPED

 (shift + octave Up) assigns an attached control pedal as vol-

ume control for the Piano section.

Both the sustain and control pedal can be active at the same time, 
indicated by both lEds being lit.

aBoUt tHE PIaNo soUNds

the Pianos in the Nord Electro 6 are organized into six 

categories

. Each 

category can contain several instrument 

models

. New piano sounds can 

be downloaded from the 

www.nordkeyboards.com

 website and added 

to the Nord Electro 6 by using the Nord sound Manager. 

right out of the box, the Nord Electro 6 features a fine collection of 
carefully selected acoustic and electric pianos, digital piano sounds and 
piano layers. a lot of effort was made to ensure a nuanced response 
and sound, matching the original models as closely as possible.

the available memory size for piano sounds is 1 Gigabyte.

 

M

When you download piano instruments with the Nord Sound 
Manager, these will always automatically be placed into their corre-
sponding category. 

a program “knows” which piano to use by referencing to the category 
and the model number. If a program references a piano that isn’t cur-
rently downloaded onto the Nord Electro 6, the display will read “Piano 
not found”. If this happens; either navigate to another instrument model 
from the same or another category (using the Piano select dial) and 
select to use this piano instead, or use the Nord sound Manager appli-
cation to download the missing instrument to the Electro 6.

aBoUt PIaNo sIZE

Nord Piano library sounds come in up to four different sizes. Below is 
an overview of how they differ in functionality:

sml

Med

lrg

xl

stereo sampled

3

3

3

3

detailed velocity mapping

3

3

3

3

String resonance

 for middle range

3

String resonance 

for entire range

3

3

Fully mapped keyboard

3

Small

 (sml) piano files use the least amount of space in the piano mem-

ory as they do not contain any pedal-down string resonance samples 
at all. 

the 

Medium

 (Med) versions include pedal-down string resonance 

samples for the important middle region of the range.

the 

Large

 (lrg) versions have the pedal-down string resonance sam-

ples all across the keyboard.

Many pianos are also available in an 

Extra Large

 (xl) version. these are 

“fully mapped” across the keyboard, meaning that each key on the Nord  
now matches its exact equivalent on the original instrument. this natu-
rally imposes a substantial increase in size.

Summary of Contents for Electro 6





































Reviews: