N260.3, 323
22
www.norcold.com
Wiring Diagram
Fig. 15 - Wiring Diagram
TB-1
GRN /
VERT
TB-6
TB-4
TB-3
TB-2
TB-5
BLK (RIB) /
NOIR (CANN.)
Art02420
90
92
96
93
94
108
207
220
221
91
111
90
108
222
167
216
No.
Description
108
120 VAC
220
3 Amp Fuse
207
Selector Switch
92
AC Heater
111
AC Ground
167
Spark Gap
216
Piezo Lighter
Remove / Replace the Refrigerator
CAUTION!
The rear of the refrigerator has sharp edged corners.
To prevent cuts or abrasions when working on the refrigerator, be careful
and wear cut resistant gloves.
Remove the Refrigerator
1. Close the valve at the propane gas tanks(s) of the vehicle.
WARNING!
To avoid possible propane gas leaks, always use two
(2) wrenches to loosen and tighten the propane gas supply lines at the
3/8 inch male fl are fi tting of the refrigerator.
2. Open the lower intake vent and remove the gas supply line
from the 3/8 inch male
fl
are
fi
tting of the refrigerator.
3. Remove the AC power cord from the receptacle.
■
Remove the DC fuse or remove the DC wiring from the
battery or the converter of the vehicle.
■
Mark the DC wires so you can put them back in the
correct location.
■
Remove the DC wires from the refrigerator.
!
!
4. Remove the screws which fasten the refrigerator to the
fl
oor.
5. Remove the screws which fasten the refrigerator to the wall.
CAUTION!
If applicable (smaller units) only carry the refrigerator
at the strap handles on top. To prevent damage to door, do NOT use your
knees to support the unit.
6. Pull unit forward and remove the refrigerator from the opening
using care not to damage.
CAUTION!
Combustion seal can be reused if the unit is removed
without damaging the seal.
!
!
91
Gas Control with Safety Valve
221
Thermocouple
222
Thermocouple Interrupter
90
+12 VDC
93
20 Amp Fuse
94
DC Heater
90
-12 VDC
