MITX-6891
Mini-ITX Motherboard Based on Intel G45 Chipset
5
MITX-6891 Dimensions
2.2 Installation Steps
Please refer to the following steps to install your computer:
1. Adjust all Jumpers on the MITX-6891 per this manual.
2. Installing System memory
3
:
Installing CPU and CPUFAN
4. Connect all of the signal line, cable, panel-control circuitry and power supply
5. Finish BIOS setup
Key components of this motherboard are Integrated circuit, and these components
will be easily damaged by electrostatic influence. So, before installing motherboard, you should
always follow the following precautions:
Summary of Contents for MITX-6891
