Norco MITX-6891, User Manual

Page: 35 / 74

MITX-6891
Mini-ITX Motherboard Based on Intel G45 Chipset
30
6
）
Sleep LED Pins
（
pin15&pin16 for GREEN LED
）
Connect these two pins with power LED, when it is power-on, LED light on ； power-off, LED
light off
；
Winking means sleeping.
7
）
Reset Button Pins(pin17&pin18 for RESET )
Connect this pins and RESET switch on panel of chassis with cable. When system can not
work on, reset can make system restart, without turning on/off the power, thereby it can prolong
system serviceable life.
8
）
IDE LED Pins (pin19&pin20 for HDD LED)
As a rule, there is a IDE LED on the panel of chassis, while IDE device (like hard Disk) is
reading or writing (no matter which IDE device), LED will flash, shows that IDE device is
running. Connect IDE LED on chassis panel and these pins (pin19 is LED anode).
2.6.13 RAM Socket(DIMM
Ⅲ
1, DIMM
Ⅲ
2
）
MITX-6891 has two 240 Pin DIMM DDR
Ⅲ
800/1066MHz socket support system memory
max. upto 4GB.