Norco MITX-6891, User Manual, Page: 43 / 74

MITX-6891
Mini-ITX Motherboard Based on Intel G45 Chipset
37
Choice of thermal management monitor
。
option
：
<Thermal Management 1(default)>
，
<Thermal Management 2>.
TM2 Bus Ratio
Performance Management bus will be activated when the hard mode detector turn hot
from cool. Min=0 Max= 255 Input DEC code = Option :< 0X (Default)>.
TM2 Bus VID
Performance Management bus voltage will be activated when the hard mode detector turn
hot from cool.Option
：
<0.8375 V (Default)>,<0.8375-1.6000>.
PPM Mode
This project has two options, namely [SMM Mode: default] and [Native Mode], SMM Mode
collectively English System Management Mode is a power saving mode, Native Mode
collectively English Native Command Queuing Mode is overclocking mode PPM Mode SMM
Mode is actually EIST, and SMM Mode and Native Mode is EIST different models inside Native
Mode. But this is a relatively old overclocking mode only. to the default [SMM Mode] replaced
by [Native Mode] will be helpful for overclocking. Intel SpeedStep technology option is EIST
switch, after the choice of open <Native Mode> better performance than <SMM Mode>.
Limit CPUID Maxval
Set CPU ID MaxVal, Max is 3. In WinXP, it is set as<Disabled>
。
Option
：
<Disabled
(Default)> ， <Enabled>.
C1E Function
CPU C1E Funcion option. Option
：
<Auto (default)>.
Execute Disable Bit
Set if the CPU is protected by hardware antivirus Option ： <Disabled> ， <Enabled(Default)>.
Virtualization Technology
Set if use the additional hardware funtion provided by Vanderpool technology. Option
：
<Disabled>
，
<Enabled(Default)>.