Norco Eco-Stim NC89481, Instruction Manual, Page: 9 / 23

Device Name Norco® Eco-Stim™ TENS + EMS
Model/type
NC89481
Power sources 4.5V D.C., 3x AAA batteries
Output channel Dual channel
Waveform Bi-phase square-wave pulse
Output current Max. 120mA (at 500ohm load)
Output intensity 0 to 40 levels, adjustable
Treatment mode: TENS, EMS and MASSAGE mode
Operating condition
5° C to 40° C with a relative humidity of 15%-93%,
atmospheric pressure from 700 hPa to 1060 hPa
Storage condition
-10° C to 55° C with a relative humidity of 10%-95%,
atmospheric pressure from 700 hPa to 1060 hPa
Dimension
109 x 54.5 x 23mm (L x W x H)
Weight
About 70g (without batteries)
Automatic shutoff 1 minute
Classification BF type applied part, internal power equipment, IP22
Size of electrodes pad 50 x 50mm, square
Output precision ±20% error is allowed for all the output parameters
Number of programs
9 programs
P.W. (Pulse Width) 100-300μs
P.R. (Pulse Rate) 2-100Hz (Hz=vibration per second)
Treatment time 5-90 minutes
Number of programs 8 programs
P.W. (Pulse Width) 100-300μs
P.R. (Pulse Rate) 2-100Hz (Hz=vibration per second)
Treatment time 5-90 minutes
Number of programs 5 programs
P.W. (Pulse Width) 100-250μs
P.R. (Pulse Rate)
2-100Hz (Hz=vibration per second)
Treatment time 5-90 minutes
17 16
4.1 Technical information
4. SPECIFICATION
TENS mode
EMS mode
MASSAGE mode
5.1 Battery
5.1.1 Check / replace batteries
Open the battery cover, insert four batteries (type AAA) into the
battery compartment. Make sure you are installing the batteries
properly. Be sure to place the batteries according to the positive
terminal (+) and negative terminal (-) markings in the battery
compartment of device.
5. OPERATING INSTRUCTION
5.1.2 Disposal of battery
Spent batteries should not be placed in household
garbage. Dispose of the batteries following your local
regulations. As a consumer, you have a legal obligation
to dispose of spent batteries properly.