35
MAINTENANCE
T-Box™ 2 Calibration
Your T-Box™ 2 has been supplied with a certificate of calibration. To maintain the specified accuracy, it is
recommended that the T-Box™ 2 is recalibrated at least once per year. Re-calibration should be carried out
at Norbar or by a Norbar approved agent, where all the facilities to ensure the instrument is functioning at
maximum accuracy are available.
IMPORTANT:
DO NOT REMOVE BACK PANEL OR CASE; THERE ARE NO CALIBRATION
SETTINGS INSIDE.
Transducer Calibration
To maintain the specified accuracy, it is recommended that transducers are recalibrated at least once per
year. Re-calibration and repair should be carried out at Norbar or by a Norbar approved agent.
Repair
Repair should be carried out at Norbar or by a Norbar approved agent, where all the facilities to ensure the
instrument is functioning at maximum accuracy are available.
Do not remove the T-Box™ 2 case; there are no parts for operator repair inside.
Cleaning
Do not use abrasives or solvent based cleaners.
Product Disposal
This symbol on the product indicates that it must not be disposed of in the general waste.
Please dispose of according to your local recycling laws and regulations.
Contact your distributor or see the Norbar web site (www.norbar.com) for further recycling information.
Battery Disposal
This product contains 1 Battery. Only dispose of battery at end of product life.
Batteries contain substances that can have a negative effect on the environment and human health.
The crossed-out wheeled bin means that batteries must NOT be disposed of in the general waste.
All batteries must be disposed of at a local waste battery collection point.
The battery does NOT contain mercury (Hg), cadmium (Cd) or lead (Pb). If the battery substances exceed
the legal limits the battery would be marked with Pb, Cd or Hg.
