8
Select AnB Screen
The T-Box™ 2 contains two inbuilt AnB (analogue board) modules, allowing for simultaneous reading of two
transducers.
The Select AnB menu is used to select one of the two AnB (transducer) ports for measurement, and is opened
when the user wishes to use the Measure Screen. Once selected you will be taken to the Measure Screen.
The example below shows a torque transducer (500 N·m) connected to AnB port 1, and a force transducer (50
N) attached to AnB port 2.
If you wish to measure from both transducers simultaneously, use the second window to open a second
Measure screen and select the other AnB for that screen.
To select a transducer just tap on it. If you remove or connect transducers, press REFRESH to update the
changes on the screen.
