Noraxon U.S.A., Inc.
myoMOTION Data Logger
P-6828 Rev A (Oct 2014)
28
Section 17: Technical Information
Block
Diagram
Model
682
MyoMOTION
Data
Logger
Coming soon…
Theory
of
Operation
The myoMOTION wireless system is based on a pre-certified transceiver module. This radio
module operates in the 2.4 GHz bands with an output power level of 1 mW and is based on a
Wireless USB product by Cypress Semiconductor.
Part
682
MyoMOTION
Data
Logger
The myoMOTION Data Logger (part #682) consists of a main motherboard and two transceiver
modules. The receiver has
no applied parts
.
The receiver interfaces to a PC via a USB port. The myoMOTION Data Logger can also charged
via the USB connection to the PC.
The Unigen transceiver in the #682 myoMOTION Data Logger can communicate with up to
sixteen (16) #610/616 myoMOTION Sensors and two (2) #500-IS DTS Footswitch Insoles.
Electro
‐
Magnetic
Compatibility
Tables
Guidance and manufacturer’s declaration – electromagnetic emissions
The myoMOTION system is intended for use in electromagnetic environment specified below. The customer or the user
of the myoMOTION system should assure that it is used in such an environment.
Emissions Test
Compliance
Electromagnetic environment - guidance
RF emissions
CISPR 11
Group 2
The myoMOTION system must emit electromagnetic energy
in order to perform its intended function. Nearby electronic
equipment may be affected.
RF emissions
CISPR 11
Class A
The myoMOTION system is suitable for use in all
establishments other than domestic establishments and
those directly connected to the public low-voltage power
supply network that supplies buildings used for domestic
purposes.
Harmonic Emissions
IEC 61000-3-2
Not applicable
Voltage fluctuations/
flicker emissions
IEC 61000-3-3
Not applicable
Guidance and manufacturer’s declaration – electromagnetic immunity
