SECTION 6
"
Troubleshooting
PEN*KEY
R
6622 Pen Computer User’s Guide
6-3
Data cannot be written to or read from
a floppy disk.
"
Confirm that the floppy disk drive is connected properly.
"
Confirm that the drive specification is correct.
"
Confirm that the file name specification is correct.
"
If a file cannot be read, confirm that the floppy disk has not been
formatted. The floppy disk may be damaged.
"
If it is not possible to write to the floppy disk, it is possible that
the floppy disk is in the write protected state. Eject the floppy
disk, and make sure that the write protect switch on the floppy
disk is in the “write enabled” position.
"
If it is not possible to write to the floppy disk, it is possible that
the floppy disk is full. Try using a different floppy disk.
"
Confirm that, under the Main menu of the Setup utility, “Dis-
kette A” is set to “1.44 3 1/2” and that under Integrated Periph-
erals in the Advanced menu, “Parallel Port” is set to “FDD.”
"
Confirm that, under the Security menu of the Setup utility, “Dis-
kette access” is not set to “Supervisor.”
"
If using a double density 1.2MB disk, confirm that the three
mode FDD driver is installed in the system.
"
Check whether the floppy disk in the floppy disk drive is a boot
disk or not. The system cannot start up from a floppy disk that
has an error or that does not have the operating system installed
on it. Change floppy disks.
"
Check the operation of the floppy disk drive. If the floppy disk
still cannot be used even after trying the solutions described
above, contact your dealer.
Summary of Contents for PEN*KEY 6622
