Norand PEN*KEY 6622 User Manual Download Page 49

Page: 49 / 70

SECTION 4

Operating the Pen Computer

PEN*KEY

6622 Pen Computer User’s Guide

4-5

Charging Battery Packs in the Pen Com-

puter and the AC Adapter/Recharger

Figure 4-4

Charging Battery Packs

1. Plug the AC power cord of the AC adapter/recharger into an AC

power outlet. The power lamp lights green.

2. Connect the AC adapter/recharger to the pen computer (with a

battery pack already installed in the pen computer ).

3. Install a battery pack in the AC adapter/recharger.
4. The internal battery pack charging lamp lights orange, and the

external battery pack charging lamps start flashing slowly. Once

the internal battery packs in the pen computer is charged, the

internal battery pack charging lamp turns off. The external bat-

tery pack in the AC adapter/recharger is charged next.

5. The external battery pack charging lamp lights orange. When

charging is complete, the external battery pack charging lamp

turns off.Because the battery packs are still not fully charged

after the lamps turn off, allow charging to continue for at least an

additional hour.

NOTE:

The battery packs in the pen computer are always charged first.

Summary of Contents for PEN*KEY 6622







































































Search results

Summary of Contents for PEN*KEY 6622

Reviews:

Related manuals for PEN*KEY 6622

Brands by name

Popular brands

Norand PEN*KEY 6622, User Manual

Search results

Summary of Contents for PEN*KEY 6622

Reviews:

Related manuals for PEN*KEY 6622

Brands by name

Popular brands