5
NookBox
Installation Guide
IR Universal Remote Control UPIC-5ZBS
IR Signal Learning and Testing
In order to use the IR Remote Control to control your home appliance, , the IR Remote Control must first learn in the IR signal sent from the
appliance’s remote control. Follow instruction below to complete the learning process. Please keep the IR Receiver away from direct lighting
or sunlight during learning process to avoid interference.
Learning
Step 1. Enter IR Learn Mode
1.
Follow instruction in ZigBee Network Setup section to join IR Remote Control into your ZigBee network.
2. Make sure all switches on the DIP Switch Block are set to OFF position.
3. Press and hold the IR button for 10 seconds and release when IR LED begins to flash.
4. The IR LED will begin flashing slowly to indicate the IR Remote Control is now entering IR Learn Mode.
Step 2. Select Appliance Type
The IR transmitter can learn up to 5 sets of IR signal for 5 different appliances.
Before starting learning, select the appliance number with Dip Switch Set 1 before proceed to learning the signals. The IR signal learnt in will
be assigned to selected appliance number.
Select the appliance type according to following Dip Switch Set 1 table. For ease of recognition and operation from Climax ZigBee Control
Panel, each device type has been given a display name on the Control Panel interface, we suggest you to learn in IR signals according to appli-
ance types displayed.
“X” means the location of this switch has no effect on appliance selection.
Example:
a. To select Air Conditioner, slide Switch 1 to ON, and Switch 2-6 to OFF.
b. To select Television, slide Switch 2 to ON, and Switch 3-6 to OFF, ignore Switch 1 position.
Step 3. Learn IR Data
Each appliance type can learn up to 8 IR signals, selected with Dip Switch Set 2.
Switch 1
Switch 2
Switch 3
Switch 4
Switch 5
Switch 6
Appliance Type
ON
OFF
OFF
OFF
OFF
OFF
Type 1 (Air Conditioner)
X
ON
OFF
OFF
OFF
OFF
Type 2 (Television)
X
X
ON
OFF
OFF
OFF
Type 3 (Home Audio)
X
X
X
X
ON
OFF
Type 5 (Others)
Switch 1
Switch 2
Switch 3
Switch 4
Switch 5
Switch 6
Switch 7
Switch 8
IR Signal
ON
OFF
OFF
OFF
OFF
OFF
OFF
OFF
1
X
ON
OFF
OFF
OFF
OFF
OFF
OFF
2
X
X
ON
OFF
OFF
OFF
OFF
OFF
3
X
X
X
ON
OFF
OFF
OFF
OFF
4
X
X
X
X
ON
OFF
OFF
OFF
5
X
X
X
X
X
ON
OFF
OFF
6
X
X
X
X
X
X
ON
OFF
7
