6
NookBox
Installation Guide
IR Pet Detector
Mounting Method
• The Detector is designed to be mounted on either a flat surface or in a corner situation with fixing screws and plugs provided.
• The base has knockouts, where the plastic is thinner and can be broken for mounting purpose.
Two knockouts are for surface fixing and four knockouts are for corner fixing as shown in the picture
• Surface mounting:
I.
Remove the fixing screw and cover assembly.
II. Break through the knockouts on the inside of base
III. Using the holes as a template, drill holes in the surface.
IV. Insert the wall plugs if fixing it into plaster or brick.
V. Screw the base into the wall plugs.
VI. Screw the cover onto the base.
• Corner mounting:
I.
Break through the four corner knockouts.
II. Using the four holes as a template, drill holes in the surface of the corner
III. Insert the wall plugs
IV. Screw the base into the wall plug.
V. Screw the cover onto the base.
