3
NookBox
Installation Guide
IR Pet Detector
Identifying the parts
1. Test Button/LED indicator
The test button is used for testing the radio performance and for learning purpose.
The LED indicator is used to indicate the status of system.
2. Battery Insulator
3. Supervision Enable/Disable Jumper Switch (JP2)
• When set as ON, Supervision is disabled. (Factory default for 433AM frequency models)
• When set as OFF, Supervision is enabled. (Factory default for 868WF frequency models)
433 FM and 868FM frequency models does not support JP2 Jumper Switch,
Supervision is enabled and cannot be disabled.
4. Sensitivity Increaser Jumper Switch (JP3)
• When set as OFF, the Detector’s detection sensitivity is in normal level. (Factory default for non Pet-Immune models)
• When set as ON, the Detectors detection sensitivity is high. (Factory default for Pet-Immune models)
5. Tamper Switch
The Tamper switch protects the Detector from unauthorized cover opening.
Jumper On
The jumper link is inserted
connecting the two pins
Jumper Off
if the jumper link is removed or
“parked” on one pin.
