Nonin 9847 Operator'S Manual Download Page 47 | Manualshive

Page: 47 / 56

Nonin 9847 Operator'S Manual Download Page 47

40

Parts and Accessories

Parts and Accessories

For more information about Nonin parts and accessories:

• See the Parts and Accessories List on the Operator’s Manual CD.
• Contact your distributor or Nonin at (800) 356-8874 (USA and Canada), +1 (763) 553 9968, or

+31 (0)13 - 79 99 040 (Europe).

• Visit nonin.com

Detailed information regarding specific sensor use (patient population, body/tissue, and application) can
be found in the respective sensor Instructions for Use.

WARNING: The use of accessories, sensors, and cables other than those specified in
the Parts and Accessories List may result in increased electromagnetic emission and/
or decreased immunity of this device.

WARNING: To avoid patient injury, use only with Nonin-branded PureLight pulse
oximeter sensors. These sensors are manufactured to meet the accuracy
specifications for Nonin Pulse Oximeters. Using other manufacturers’ sensors can
result in improper pulse oximeter performance.

«
...
45
46
47
48
49
...
»

Summary of Contents for 9847

























































Reviews:

No comments