NOMIS Seismographs Mini-SuperGraph II User Manual Download

Page: 20 / 44



Save Setup – Choose YES or NO to save the setup for later use. If you choose to
save settings, enter a name to identify the saved settings.

Additional Settings:



Alarm 1: Able to set as follows: Off, Seismic, Air, both. If you choose Seismic, Air,
or Both, set the trigger level for the sensor(s) selected.



Alarm 1 Time: Range: 0.5-60.0 seconds in 0.5 second increments. This is the
amount of time the alarm output will pull to GND reference.



Alarm 2: Able to set as follows: Off, Seismic, Air, both. If you choose Seismic, Air,
or Both, set the trigger level for the sensor(s) selected.



Alarm 2 Time: Range: 0.5-60.0 seconds in 0.5 second increments. This is the
amount of time the alarm output will pull to GND reference.

Summary of Contents for Mini-SuperGraph II













































Search results

Summary of Contents for Mini-SuperGraph II

Reviews:

Related manuals for Mini-SuperGraph II

Brands by name

Popular brands

NOMIS Seismographs Mini-SuperGraph II, User Manual

Search results

Summary of Contents for Mini-SuperGraph II

Reviews:

Related manuals for Mini-SuperGraph II

Brands by name

Popular brands