manualshive.com logo in svg

Nomadix Access Gateways, User Manual, Page: 305 / 330

Share
Download
Nomadix Access Gateways User Manual Download Page 305

A

CCESS

 G

ATEWAY

Troubleshooting

293

Warning: before using this command you must 
FTP a valid boot image to the flash.

When upgrading the software, the system 
needs the new boot image file. You must FTP 
the file from NOMADIX™ to your local hard 
drive.

Warning: no DHCP services are available to 
subscribers.

This message is displayed because you have 
disabled both the external DHCP relay and the 
system’s DHCP service. To make DHCP 
available to subscribers, at least one of these 
functions must be enabled.

“x” is ambiguous.

The system has more than one option it can 
display. You must provide additional 
characters to narrow the system’s choices 
down to just one.

“xxx” is invalid, enter ...

Your input is not recognized by the system.

Error Message

Cause

Summary of Contents for Access Gateways











































































































































































































































































































































Reviews:

No comments