Nomadix Access Gateways, User Manual, Page: 236 / 330

A
CCESS
G
ATEWAY
224 System Administration
1.
From the Web Management Interface, click on
System
, then
Static Port-Mapping Add .
The Add Static Port-Mapping Entries screen appears:
2.
Enter the
Internal IP Address
.
3.
Enter the
Internal Port
reference.
4.
Enter a valid
MAC Address
.
5.
Enter the
External IP Address
.
6.
Enter the
External Port
reference.
7.
Optional : Enter the
Remote IP Address
. Leave this field set to zero if you want to connect
to the internal device from any network-side workstation.
8. Optional: Enable the Protect with Source IP-based Access Control option. Enabling
this will only allow address in the source-based access control list to connect on this port
mapping. Source-based access control needs to be enabled for this to be in effect.
9.
Optional : Enter the
Remote Port
reference. Leave this field set to zero if you want to
connect to the device from any TCP/UDP port of a network-side workstation.
Ensure that the device with the Internal IP Address has been added to the
subscriber’s table.
The External IP address field will default to the IP address of the Access
Gateway.