Installation Guide
5. Plug the USB end of the display cable into the
base of the display module, and carefully route
the other end back to the RC M CPU. Plug the
cable into the port marked “Display.”
Rear Radar Antenna
1. Follow the same installation instructions as for
the front radar antenna, but with the rear antenna
oriented to point out the rear of the vehicle.
Rear AL Priority Laser Sensors
1. Follow the same installation instructions as for
the front AL Priority Sensors, but with the sensors
oriented to point out the rear of the vehicle.
2. As with the front sensors, they MUST be
installed on the exterior of the vehicle, level with
the ground, and pointed straight to the rear of the
vehicle - not toed in our out horizontally.
After installation is complete, please proceed to the next section to update the software on the RC M and
ALP.
YOU MUST UPDATE SOFTWARE BEFORE USE!
