GB 33
Navi Bars
Access
To open this menu you will be asked to enter your access code.
From the factory the access code is set to 1234
.
The following settings can be altered from this menu.
Access Control
Select
Yes
or
No
to turn the access control in all menus on or off.
Watch out. When you select “No” in this menu it will still be
able to watch channels you lock in the “Edit channels” ->
“Lock channels” menu.
Receiver lock
If you select
Yes
you will have to enter the access code every
time you start the Mediamaster from standby.
Age rating control
If you want everybody to have access to all available types of pro-
grammes, select
No
If you select
Yes
you may block programmes unsuitable for chil-
dren.
Age Limit
Select an age limit between 3 and 18 years on the line that ap-
pears.
However, you should be aware that not all Service Providers have
the necessary codes for these functions implemented in their
transmissions.
Change access code
From here you can change the access code from the stand-
ard 1234. DO NOT FORGET IT! Without it, you do not have
access to any of the functions where the code is required!
Picture format
If you have a TV set with the 4:3 picture format and the transmis-
sion is in 16:9, you can select “Fullscreen” or “Letterbox”.
Fullscreen will fill up the screen but cut off some information on
the left and right sides.
Letterbox will give a complete picture, but leave black areas at
the top and bottom.
Letterbox
Fullscreen
