GB 31
Edit Satellites
Use this alternative if you are going to watch channels from a not
pre-programmed satellite.
Navi Bars
Antenna
To open this menu you will be asked to enter your access code.
From the factory the access code is set to 1234
.
The lines
Change antenna type
and
Modify antenna settings
will get you to the same settings as explained in the pages 16-18.
• First, give the satellite a name
*
. When you have typed the
name step to next line,
position
, using the button.
*
How to enter the name, please see page 28.
• Write the
position
by entering two digits for the whole
number of degrees and one digit for the decimal degree.
• Select the East/West satellite position.
• Press
ok
to confirm all settings and continue with the chan-
nel search procedure.
☛
☛
☛
