Nokia IP290 - Security Appliance, Installation Manual

Page: 36 / 81

3
Performing the Initial Configuration
36 Nokia IP290 Security Platform Installation Guide
You can also connect the remaining interface cables at this point, although you are not required
to do so.
For details about cables and other related information, see
Chapter 4, “About IP290 Appliance
Network Interface Cards.”
You can use Nokia Network Voyager or the command-line interface (CLI) to configure the
remaining network ports on your Nokia IP290 appliance. Details about how to use Network
Voyager, the CLI, and Nokia Horizon Manager are provided in the following sections.
Using Nokia Network Voyager
Use Nokia Network Voyager to configure and monitor your appliance. For additional
information about how to use Network Voyager, see
“Viewing Nokia IPSO Documentation by
Using Nokia Network Voyager” later in this section.
To open Nokia Network Voyager
1.
Open a Web browser on the host you plan to use to configure or monitor your appliance.
2. In the Location or Address field, enter the IP address of the initial interface you configured
for the appliance.
You are prompted to enter the
admin username and the password you entered when you
performed the initial configuration.
Note
If the username login screen does not open, you might not have a physical network
connection between the host and your appliance, or you might have a network routing
problem. Confirm the information you entered during the initial configuration and check
that all cables are firmly connected. For more information, see the troubleshooting
section in the installation guide for your appliance.
Viewing Nokia IPSO Documentation by Using
Nokia Network Voyager
The following documentation is available in Nokia Network Voyager and is accessible from the
Network Voyager interface, as shown in
Figure 9 :
„
Nokia Network Voyager Reference Guide —This guide is the comprehensive reference
source for Nokia Network Voyager. To access this source, look at the list in the navigation
tree on the left side of the window (as shown in
Figure 9 ).You can also access the Nokia
Network Voyager Reference Guide and other Nokia IPSO documentation at the Nokia
support site ( https://support.nokia.com ) or on the software CD that was delivered with your
appliance.
„
Nokia Network Voyager Inline Help —You can access inline help when you use Nokia
Network
Voyager. Inline help is the context-sensitive information source for
Network