manualshive.com logo in svg

Nokia A032, User Manual

Share
Download
Nokia A032 User Manual Download Page 58

52

Nokia A032 Advanced User Guide

Internet Gateway

Option

Description

Require Encrypted 
Logon

If checked, the A032 will refuse to log on to ISPs which 
do not support encrypted log-on (i.e. PPP-MD5CHAP).
If this option is disabled, and your ISP doesn’t support 
encrypted logons, the A032 may use a less secure 
method (PAP) in which the username and password are 
sent in clear text format. 

Modem Speed

Specifies the data rate used to communicate between 
the Nokia A032 and a modem. Note that this is not 
necessarily the rate that the modem will support when it 
communicates to the ISP. Generally the modem will not 
connect at a speed higher than this rate but it may 
connect at a speed which is lower. 

Use Logon Script

This check box informs the A032 that it must use a logon 
script in order to connect to the network. When this box 
is checked you must configure the script using the 

Set 

Logon Script

 sub-screen (see page 55).

Modem Setup String

This allows you to send commands to the modem prior 
to dialing. Typically these would be AT commands to set 
various modes and options. Most modems do not require 
any special setup to operate.

Inactivity Timer

This determines how many minutes of inactivity are 
allowed before the modem connection is dropped. The 
default is 3 minutes.

Clear on Rcv

This is related to the Inactivity timer. It determines 
whether 

received

 frames (i.e. from the ISP to the Access 

Point) are considered to be ‘activity’. It is off by default, 
preventing the problem where the link is kept up 
indefinitely due to spurious frames sent from the ISP to 
the account. 
The only time it may be necessary to set this checkbox is 
if you are using a non-acknowledged download such as 
a UDP multicast session for real time video.

A032-Adv.book  Page 52  Monday, November 13, 2000  10:47 AM

Summary of Contents for A032



























































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands