Nokia A032 User Manual Download

Page: 202 / 218

196

Nokia A032 Advanced User Guide

Performing the upgrades

In order to perform the following upgrades you
must have the correct files in the same
directory as the Nokia Access Point Upgrade
utility.

These will have been extracted automatically as
part of the utilities installation process (see

Appendix D

), or may be supplied as an update

from Nokia.

For example, the firmware file may be called
something like

03_A032.bin

If you do not have the required file for a given
upgrade, the appropriate option in the Nokia
Access Point Upgrade utility window will not
appear.

To perform an upgrade:

Select the appropriate option (

Firmware

BIOS

)

from the

Upgrade

drop-down menu

the Nokia Access Point Upgrade utility
window.

Click

Send

You’ll see a status bar indicating progress.

When the upgrade is complete, restart the
Nokia A032 in normal mode.

A032-Adv.book Page 196 Monday, November 13, 2000 10:47 AM

Summary of Contents for A032



























































































































































































































Search results

Summary of Contents for A032

Reviews:

Related manuals for A032

Brands by name

Popular brands

Nokia A032, User Manual

Search results

Summary of Contents for A032

Reviews:

Related manuals for A032

Brands by name

Popular brands