manualshive.com logo in svg

Nokia A032, User Manual

Share
Download
Nokia A032 User Manual Download Page 129

SNMP manager

123

A032 LAN table (Ethernet)

Note that counters are 32 bit and overflow back 
to 0.

A032 serial table

These entries pertain to the serial port on the 
back of the A032 unit.

A032 distribution

This section relates to the Access Point function 
of the A032.

LAN Interface Index

Fixed value of 1.

LAN Status

Indicates up or down (if disabled by management 
process).

LAN Current Interface

Indicates 10baseT.

LAN Rx All Frames

Counter of all frames received by LAN interface.

LAN Rx Accept frames

Counter of frames which are copied into Access Point for 
processing.

LAN Rx Copied Octets

Counter of bytes transferred into Access Point from LAN 
interface.

LAN Rx Frame Discards

Frames discarded by Access Point due to unspecified 
problem.

LAN Tx All Frame

Counter of all frames sent to LAN interface.

LAN Rx Sent Octets

Counter of Bytes transferred to LAN interface.

Serial Status

Indicates up or down depending on the state of DTR.

Number Associations

How many wireless stations are currently associated 
with the Access Point.

Number of LAN entries

How many MAC addresses have been detected on the 
LAN interface.

A032-Adv.book  Page 123  Monday, November 13, 2000  10:47 AM

Summary of Contents for A032



























































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands