RM-384
RF Troubleshooting
Page 4-24 Company Confidential Issue1
Copyright © 2008 Nokia. All rights reserved.
Setup for Bluetooth Troubleshooting
Use the following steps to configure FTM mode for Bluetooth troubleshooting.
1.
Connect Bluetooth connector to a Bluetooth call box. (EX: Anritsu 8852B)
2.
Put PWB on the module jig, connect data service cable between PC and Module Jig and connect a power
supply
3.
Open RF Toolkit in L3 program and select Baseband function
4.
Select “KeyPad Simulator”
5.
Press keyPad “ *#4183# ” to enter Bluetooth test mode.
Figure 48 Display of entering the Bluetooth test mode