manualshive.com logo in svg

Nokia 6111 RM-82, Service Manual, Page: 94 / 254

Share
Download
Nokia 6111 RM-82 Service Manual Download Page 94

FPS-8

FLASH prommer

The Flash Prommer FPS-8 is used with e.g. DA-8 and JVB-1. Power is

supplied to FPS-8 from the Universal Power Supply.
Also included in the sales pack:
• ACF-8, AC charger
• CA-10 DS, Printer cable
• AXS-4, D9-D9 cable

JBV-1

Docking station

The JBV-1 docking station is a general tool that has been designed for

calibration and software update use. The JBV-1 is used together with

a docking station adapter as one unit
In calibration mode the JBV-1 is powered by an external power supply:

11-16V DC. When flashing the power for the phone must be taken from

the flash prommer.

Note: 

JBV-1 main electrical functions are:

• adjustable VBATT calibration voltage, current

measurement limit voltage: VCHAR, current measurement:

ICHAR

• adjustable ADC calibration voltage via BTEM and the BSI

signal

• BTEMP and BSI calibration resistor
• signal from FBUS to the phone via the parallel jig
• control via FBUS or USB
• Flash OK/FAIL indication

MJ-58

Module jig

The MJ-58 module jig is used for testing the following modules:
• User interface
• Baseband and RF on system module

Note: 

The nominal supply voltage for MJ-58 is +6.0 V. The

supply voltage must not 12.0 V (min. 5.0 V).
Supply the power to the jig only when the jumper is open =

regulated.

RF loss in MJ-58:
• GSM 900: 0.3 dB
• GSM 1800/1900: 0.6 dB
• Bluetooth: <1 dB
Spare pins:
• DE-50-T45 (5pcs)
• 100-GSS-19-3.8-G (5pcs)
• LCR 100 (2pcs)

RM-82

Nokia Customer Care

Service tools and concepts

Page 4 –10

COMPANY CONFIDENTIAL

Issue 1

Copyright © 2005 Nokia. All rights reserved.

Summary of Contents for 6111 RM-82































































































































































































































































Reviews:

No comments