manualshive.com logo in svg

Nokia 6111 RM-82, Service Manual, Page: 78 / 254

Share
Download
Nokia 6111 RM-82 Service Manual Download Page 78

Updating JBV-1 docking station software

Before you begin

The JBV-1 docking station contains software (firmware) which can be updated. You need the following

equipment to update the software:
• PC with USB connection
• operating system supporting USB (Not Win 95 or NT)
• USB Cable (can be purchased from shops or suppliers providing PC hardware and accessories)
• JBV-1 docking station
• external power supply (11-16V)
Before installation:
• Download 

Jbv1_18_update.zip

 file to your computer (in 

C:\TEMP

 for example) from your download web

site.

• Close all other programs.
• Follow instructions on the screen.

Context

The JBV-1 docking station is a common tool for all DCT-4 generation products. In order to make the JBV-1

usable with different phone models, a phone-specific docking station adapter is used.

Steps

1.

Run 

Jbv1_18_update.zip

 file and start software installation by double clicking 

Setup.exe

.

Note: 

DO NOT CONNECT THE USB CABLE/JBV-1 TO YOUR COMPUTER YET!

Figure 63 Extracting JBV-1 update files

Files needed for JBV-1 package setup program will be extracted.

RM-82

Nokia Customer Care

Phoenix service SW

Page 3 –38

COMPANY CONFIDENTIAL

Issue 1

Copyright © 2005 Nokia. All rights reserved.

Summary of Contents for 6111 RM-82































































































































































































































































Reviews:

No comments