Figure 87 Auto tuning concept with RX and TX tuning devices and splitter
Copy the two phone specific ini-files, for example
rm_13_tunings.ini
and
autotune_RM-13.ini,
to a phone
specific folder, for example
\Phoenix\products\RM-13\
.
Steps
1. Make sure the phone (in the jig) is connected to the equipment. Else, some menus will not be shown in
Phoenix.
2. The first time you are using automatic tuning on this phone model, on this computer, you will have to
Set loss
for cables and jigs.
3. To go to autotune, select
Tuning (Alt-U)
>
Auto-Tune (Alt-A)
from the menu.
4. If you need more assistance, please refer to the Phoenix
Help
.
RM-82
Troubleshooting for Repair service
Nokia Customer Care
Issue 1
COMPANY CONFIDENTIAL
Page 6 –13
Copyright © 2005 Nokia. All rights reserved.