Nokia 201 Service Manual Download Page 94

Page: 94 / 158

Knowledge with Intelligence for Care Support (KICS)

Information and software for all Nokia products is available in Nokia Online / KICS Information Page (https://

icknowledge.online.nokia.com). After logging in with a valid user name and password, select the

S&R

Documents

category and then

Service Sw

sub category.

If you do not have access to KICS, please go to the site and click on Registration Request.
For each new software version, a description of the changes and modifications is made available in the form

of a service bulletin. You will find it in the Service Bulletins category once you select a specific model under

the subcategory list.

Installation path

A default installation path is provided (

C:\Program Files\Nokia\Nokia Care Suite\TestingAndTuningTool

Preparation

Supported OS

•

Microsoft Windows XP SP2

•

Microsoft Windows 7

Minimum HW requirements

•

CPU: Intel or Intel compatible 1 GHz or faster

•

RAM: Minimum 1 GB

•

Hard Disk: 300 MB available

•

Product-specific service cable or service adapter

SW requirements

•

Microsoft .NET Framework 2.0

•

Microsoft Core XML Services (MSXML 6)

•

Care Suite package: Nokia_Care_Suite_Store_<year>_<week>_<build_number>.msi where year, week and

build number are available.

•

Product-specific data packages from Online / KICS Information Page, or via online access to Nokia Firmware

Repository (FiRe).

•

GPIB drivers

•

NI VISA Runtime (see next chapter for more information)

Other requirements

•

As a part of Testing and Tuning Tool installation National Instruments VISA 4.62 Runtime is installed if it

is not exists already. The installation package of the VISA is downloaded from internet so online connection

is needed. If the workstation does not have online connection, the VISA can be downloaded from Online /

KICS Information Page.

•

Note! It may happen that GPIB drivers must be reinstall after the VISA Runtime has been installed. This

kind of need has been noticed at least with CEC PCI-488 GPIB card.

RM-761; RM-799; RM-800

RF Troubleshooting

Page 4 – 28

COMPANY CONFIDENTIAL

Issue 1

Summary of Contents for 201



































































































































Search results

Summary of Contents for 201

Reviews:

Related manuals for 201

Brands by name

Popular brands

Nokia 201, Service Manual

Search results

Summary of Contents for 201

Reviews:

Related manuals for 201

Brands by name

Popular brands