●
Phone IP address
(for IPv4 only) — Enter the IP
address of your device.
●
DNS addresses
— Enter the IP addresses of the
primary and secondary DNS servers, if required
by your service provider. To obtain these
addresses, contact your internet service
provider.
●
Proxy server address
— Enter the address of
the proxy server.
●
Proxy port number
— Enter the port number
of the proxy server.
WLAN internet access points
Select
Menu
>
Settings
and
Connectivity
>
Destinations
>
Access point
, and follow the
instructions.
To edit a wireless LAN (WLAN) access point, open
one of the access point groups, and select an access
point marked with . Follow the instructions from
your WLAN service provider. Select from the
following:
●
WLAN network name
— Select
Enter
manually
or
Search for networks
. If you select
an existing network, WLAN network mode and
WLAN security mode are determined by the
settings of its access point device.
●
Network status
— Define whether the network
name is displayed.
●
WLAN network mode
— Select
Ad-hoc
to
create an ad hoc network and to allow devices to
send and receive data directly; a WLAN access
point device is not needed. In an ad hoc network,
all devices must use the same WLAN network
name.
●
WLAN security mode
— Select the encryption
used:
WEP
,
802.1x
, or
WPA/WPA2
(802.1x and
WPA/WPA2 are not available for ad hoc
networks). If you select
Open network
, no
encryption is used. The WEP, 802.1x and WPA
functions can be used only if the network
supports them.
●
Homepage
— Enter the web address of the
starting page.
●
Use access point
— Set the device to create a
connection using this access point automatically
or after confirmation.
The available options may vary.
Active data connections
Select
Menu
>
Settings
and
Connectivity
>
Connection mgr.
.
In the active data connections view, you can see
open data connections:
data calls
packet data connections
79
Co
nnect
ivi
ty
