Nokeval 98372, Manual

Page: 7 / 21

7
Configuring the device
There is usually no need to configure the device since most of the settings are already at their best
defaults. However, if you want to see what kind of settings there are or edit settings, use MekuWin
program and DCS772 (USB-POL converter). You can download MekuWin from Nokeval’s web site
www.nokeval.com for free.
Connection settings
Communication settings for configuration:

baud rate 9600
 protocol SCL
 address 0
Programming connector
The device has a 3PIN POL programming connector. Use POL-3PIN adaptor to connect the DCS772 to
the device. The 3PIN POL programming connector can be connected in both ways.
Configuring if Modbus use is needed
If Modbus is used, then the device has to be re-configured for Modbus use in Serial Communication sub
menu:
Config

Serial communication

Protocol


Modbus
 WXT5x0
 Ascii
 SCL.
Choose Modbus.
Config

Serial communication

Baud rate

 300

600

1200
 2400
 4800
 9600
 19200

38400

57600
 115200

230400
Choose the desired baud rate.
Config

Serial communication

Bits

 8N1
 8N2
 8E1
 8O1