Nokeval 98372, Manual

Page: 11 / 21

11
Examples of the Modbus settings
The following examples are in the test connection where FT20, TTM20X, Eurotherm 2216e and RMD681
were connected to Modbus line and where Virtual IDs were set as follows.
The device / reading Slave Address Virtual IDs
Internal measurements 0…2
FT20 4 3…5
TTM20X 2 6
Eurotherm 2216e 1 7
RMD681 3 8…15
Config / Modbus
Baud rate 19200
Bits 8E1
Timeout[s] 1
Query interval[das] 3
Queries 4
Overview ->
Query 1 ->
Query 2 ->
Query 3 ->
Query 4 ->
Example of the Modbus settings for RMD681
Config / Modbus / Query 1
Slave 3
Register Type Input Register
Register 0
Results 8
Data type Float LE
Divider -
Virtual ID 8
Status OK 25.2
Example of the Modbus settings for FT20
Config / Modbus / Query 2
Slave 4
Register Type Input Register
Register 1000
Results 3
Data type Sint 16-bit
Divider 10
Virtual ID 3
Status OK 15.3
Example of the Modbus settings for TTM20X
Config / Modbus / Query 3
Slave 2
Register Type Holding Register
Register 0
Results 1