Noitom Hi5, User Manual, Page: 8 / 22

Hi5 VR Glove Developer Guidelines
NOITOM corporation Sep.2017 V1.1
Hi5 VR Glove Developer Guidelines 5
3. Support up to 6 sets of Hi5 working in the same field simultaneously (in different
working frequency; clean RF environment required).
Notice
:

Making the antenna side of Dongle points to the Gloves can get better RF
performance (keep the Dongle at the same height as the Glove);

Setting the wireless card of laptop to flight mode can get better RF performance;

You can switch the working frequency manually (click the button of Dongle) when the
RF performance is bad (lagging hands in HMD).
2.5 Usages
2.5.1 Basic Operation Steps
Step 1: Preparing
A. Install AA Batteries into Gloves.
B. Mount optical tracking devices to Gloves (see
“3.1 Mounting Optical Tracking Devices”).
Step 2: Plugging in the Dongle
Plug the Dongle into PC. The indicator light of Dongle will start to breathe.
If possible, please plug the Dongle directly into the USB port on the VIVE headset using a USB
extender (not provided) to get the best RF performance with the Hi5 Gloves.
Step 3: Starting the Gloves
Turn on the Gloves (press the button on the Gloves), and the indicator light will start to breathe.
Then normally the Gloves should connect to Dongle automatically, and the indicator light of both
Gloves and Dongle will turn to rapid flashing immediately (then skip Step 4). However, if the
indicator light keeps breathe, please do Step 4.
Reminder: If you use optical tracking devices (such as VIVE Tracker) on Hi5, please do not forget
to start them to get the positions of your hands.
Step 4 (Optional): Pairing Gloves with Dongle
(see
“2.5.2 Pairing Gloves”)
Step 5: Wearing Gloves
A. (Suggested) Wearing inner plastic gloves before putting on the Hi5 Gloves
B. Wearing Hi5 Gloves (see
“3.2 Wearing Gloves”)