Nogueira VFN-9000, Instruction Manual

Page: 17 / 84

17
NOTE: Tractor draw-bar must have head (according to
illustrated), preventing the wagon from raising up.
c) Install the coupling pin (4) and lock it with a counter-
pin, preventing accidental uncoupling.
To couple the head to the tractor, follow the instructions
below:
a) Approximate the tractor aligning the draw-bar (1) with
the coupling terminal (2) of the wagon.
b) In case there is need, lower or rise the head through
the stand jack (3).
d) Pull the locking pin (5) and put the stand-jack (3) in
horizontal position. After that, reinstall the pin to lock the
stand-jack.
NOTE: When the machine is running, the stand-jack
should be in work position (horizontal).
e) Check the wagon leveling and adjust as needed,
according to described in the previous page.
4.2- Tractor head coupling
Coupling should be done on a flat and even
place
Note:
3
5
1
4
2