Nogueira FTN-1600, Instruction Manual

Page: 207 / 240

Instructions Manual
87
6. Maintenance
Change the sharpener stone when it shows a
loss of sharpening capacity.
1.
Remove the bolts (A) and (B);
2.
Remove the cover (C) from the sharpener;
3.
Using an 'Allen' key, remove the four bolts
(D);
4.
Remove the sharpener (F) from the rails;
5.
Remove the four bolts (G) that secure the
stone (H) to the sharpener;
6.
Replace the stone set (H) with a new one;
7.
Fix the stone assembly with the four bolts
(G), fit the sharpener to the rails, mount
the sharpener on the machine, place the
sharpener cover and secure it with the
two bolts (A).
A
B
C
D
D
F
G
H
ENGLISH
Always use original stones. Inappropriate
stone may break during sharpening and
cause an accident with personal injury and
damage to the machine.
The use of PPE (suitable gloves and safety
goggles) is mandatory during the above
procedure.
6.4.3- How to replace sharpening stone
6.4.4- How to replace sharpening stone
ATTENTION!
Turn off the tractor and remove
the ignition key before starting
the following procedure.
ATTENTION!