OPERATION
Speedshine
1700LS/1700HD/1700DS/2000LS/2000HD/2000DS (11–99)
7
MACHINE COMPONENTS
1
2
3
4
5
8
11
10
7
6
9
1. Twist Grips
2. Adjustable Handle Lever
3. Safety Lock Button
4. Speed Select Switch (Dual Speed Only)
5. Circuit Breaker Button
6. Power Cord Hook
7. 15m (50 ft) Power Cord
8. Motor Cover
9. Wheels 102mm (4 in)
10. Scrub Head
11. Cleaning Pad
MACHINE SETUP
1.
Carefully check carton for signs of damage.
Report damages at once to carrier. Check whether
cord plug installed corresponds to your wall outlet.
2.
Scrubber is shipped fully assembled. Pad driver,
pads and brush are sold separately. Just select
and install recommended brush or pad driver with
pad that meets your cleaning needs.
NOTE: Proper pad or brush selection is important for
best results. See your authorized distributor to assist
you in choosing the right pad or brush for your specific
cleaning needs.
WARNING: Hazardous Voltage. Shock or
electrocution can result. Unplug machine before
servicing.
3.
To install pad or brush, tilt machine back on
wheels until machine is resting on handle.
4.
Position brush/pad driver on driver lug and turn
counter–clockwise to secure (
Figure 1.).
Pad Driver
Pad
OR
Brush
FIG. 1.
5.
To install pad, position pad on pad driver and tap
with hand to secure (
Figure 1.).
6.
After brush or pad is installed return machine to
upright position.
7.
To adjust handle to a comfortable height, lift
handle release lever and lower handle to desired
height. Handle will lock into position when release
lever is released (
Figure 2.).
