OPERATION
8
Speedshine
1700LS/1700HD/1700DS/2000LS/2000HD/2000DS (11–99)
Handle
Release
Lever
FIG. 2.
8.
Plug power supply cord into a grounded wall outlet
(
Figure 3.).
Grounded
3 Hole Outlet
Ground Pin
FIG. 3.
FOR SAFETY: Do not operate machine unless
cord is properly grounded.
FOR SAFETY: Do not operate machine with the
use of an extension cord.
MACHINE OPERATION
FOR SAFETY: Do not operate machine unless
operator manual is read and understood.
1.
Lift handle so scrub head is parallel to floor.
ATTENTION: Use caution when beginning to
operate machine. Machine will jolt if proper
instructions are not followed.
2.
For
Dual Speed Models select desired motor
speed
. Position switch downward (185rpm) for
scrubbing/ stripping OR position switch upward
(300rpm) for spray buffing (
Figure 4.).
FOR SAFETY: When using machine, go slow on
inclines and slippery surfaces.
300rpm
185rpm
Speed
Select
Switch
FIG. 4.
NOTE: Start out in slow speed until you are
comfortable with operating .
3.
Start machine by pressing safety lock button and
turning twist grips forward. Release thumb from
safety lock button once machine starts (
Figure 5.).
Safety Lock
Button
FIG. 5.
4.
To move left, slightly lower handle and machine
will move left. (
Figure 6.A) To move right, slightly
raise handle and machine will move right (
Figure
6.B). Work machine with a side to side motion
when operating.
A
B
FIG. 6.
