19
21
Check if correct fuses are used, if necessary replace.
•
22
Test the audio warning signal
•
23
Check the contactors
•
24
Check the frame leakage (insulation test)
•
25
Check function and wear of the accelerator
•
26
Check the electrical system of the drive motor
•
b. Lubricating points
Lubricate the marked points according to the maintenance
checklist. The required grease specification is: DIN 51825,
standard grease.
c. Check and refill hydraulic oil
It is recommended to use hydraulic oil in connection with average temperature:
Environment temperature
–5
℃
~25
℃
>25
℃
Type
HVLP 32,
DIN 51524
HLP 46,
DIN 51524
Viscosity
28.8-35.2
41.4 - 47
Amount
5L (depends on specific model)
Waste material like oil, used batteries or other must be probably disposed and recycled according to the
national regulations and if necessary brought to a recycling company.
The oil level in the oil tank should be between min and max marks with fully lowered forks.
If necessary add oil at the filling point.
1
Load roller bearing
2
Mast
3
Chain
4
Steering bearing
5
Gear box
6
Steering roller bearing
7
Tiller steering bearing
Fig. 15: Lubricating points
