15
Carefully pull out the emergency button 7 (Fig. 1) and start the truck by activation from pin-code lock (Fig.
7) access. Then move the tiller to t
he operating zone (‘F’, Fig.10).
Turn the accelerator knob
to the desired direction forward ‘Fw.’ Or backwards ‘Bw.’(Fig. 10).
Control the travelling speed by moving accelerator knob (10) carefully until you reached desired speed.
If you move the accelerator knob back to the neutral position, the controller decelerates the truck until
the truck stops. If the truck stops, the parking brake will be engaged.
Carefully drive the truck to the destination. Watch the route conditions and adjust the travelling speed via
the accelerator knob.
f. Steering
S
teer the truck by moving the tiller to left or right side.
g. Braking
PLEASE CHECK THE BRAKING DISTANCE WITH TRUCK BEFORE OPERATION
THE BRAKING PERFORMANCE DEPENDS ON THE TRACK CONDITIONS AND
THE LOAD CONDITIONS OF THE TRUCK
The braking function can be activated on several ways:
•
By moving the accelerator button (
Fig.7, 9
) back to the initial ‘0’ position or by releasing the button,
the regenerative braking is activated. The truck brakes until it stops.
•
By moving the accelerator button (
Fig.7, 9
) from one driving direction directly to the opposite
direction, the truck brakes regenerative until it starts traveling into the opposite direction.
•
The truck
brakes, if the tiller is moved up or down to the braking zones (‘B’). If the tiller is released,
the tiller moves automatically up to the upper baking zone (‘B’).The truck brakes until it stops.
•
The safety (belly) button (
Fig.7, 8
) prevents the operator from being crushed. If this button is
activated, the truck decelerat
es and/ or starts traveling into the backwards direction (‘Bw.’) for a
short distance and stops. Please consider, that this button also operates, if the truckis not traveling
and the tiller is in the operating zone.
h. Malfunctions
If there are any malfunctions or the truck cannot be operated, please stop using the truck and activate
the emergency button (Fig 1, 7) by pressing it. If possible, park the truck in a safe area.
Inform immediately the manager and, or call your service. If necessary, tow the truck out of the operating
area by using dedicated towing/ lifting equipment.
i. Emergency
In emergencies or in the event of tip over (or off dock), keep safe distance immediately. If possible push
the emergency button
(
Fig 1, 7
)
. All electrical functions will be stopped.
