Use and Maintenance Manual model “H14 V SHAPE”
25
ENGLISH
ENGLISH
10.5 SWITCHING ON/OFF THE PRODUCT
11.2 CLIMA COMFORT FUNCTION
As described in the “saving mode” paragraph, the
appliance has the objective of meeting the comfort-
able heating requirements of the user. The function
which can be enabled, linked to his mode, also en-
sures, if the home has a good energy class, a fuel
saving through intelligent switch off of the product
(reaching or required of the desired setting).
The procedure follows to enable the function, the
change of values with relevant meaning, a practical
example of setting.
Each time the appliance is turned on, it ALWAYS
turns on at maximum power to guarantee the
greatest amount of heat to the heating system.
To switch on the product, prolonged press the key
until the following screen appears,
followed by an acoustic signal.
This screen remains on for the following machine sta-
tuses;
SWITCH ON
•
Initial phase of pellet loading;
WAITING FLAME
•
Flame development waiting
phase;
FLAME PHASE
• Stabilisation phase of flame and
oxidiser inside the brazier;
The appearance is highlighted of the “flame” sym
-
bol with the writing ON, without displaying the work
power.
Prolonged pressing of the key accompanied by
acoustic signalling causes switching off of the prod-
uct, as well as resetting of any alarms.
For models with an automatic cleaner, during
the switch on phase, the product activates a brazier
cleaning phase before passing to SWITCH ON.
In the event of FAILED IGNITION, after pressing the
button, a POP UP signals the need to suck the pellet
from the brazier before turning the appliance back
on, thus avoiding discharge of unburned pellets into
the ash drawer.
During first start-up of the product, unpleasant
odours may occur or smoke caused by evaporation
or drying of certain materials used. This phenomena
disappears after some hours of use. During this peri-
od, you are advised to keep the premises well ven-
tilated.
Always vacuum the brazier using an ash cleaner,
risk of fire.
11 WORKING PHASE
Products in the range include a working phase with 2
operating powers. Once the room-temperature
setting values - if set - are reached, the appliance will
behave as follows.
11.1 SAVING MODE
ECONOMY mode screen when desired room
temperature is reached:
ECONOMY mode screen when desired Boiler water
setting is reached:
ECONOMY mode screen with both settings reached:
During working phase, the appliance operates so
as to reach room-temperature and boiler-water va-
lues as they have been set by the User; once such
conditions are fulfilled, power will be decreased until
ECONOMY mode is enabled, a phase in which fuel
consumption is at its lowest.
