AGRICULTURAL MACHINERY MANUFACTURERS
17
04.09.2009
VERSION WITH SKIDS:
RAISE THE MACHINE SLIGHTLY FROM THE GROUND
Remove bolts (
A, B, C
) which secure skid (
SL
), to the
machine and to guard (
P
).
On the skid (
SL
) select holes according to the height
required, fit bolts
(
A and B
)
and screw them.
Fit bolt (
C
) into the guard hole
(
P
), keeping the guard parallel
to the lower edge of the side part.
Screw and tighten all bolts.
VERSION WITH ROLLER:
RAISE THE MACHINE SLIGHTLY FROM THE GROUND
Loosen bolts (
OS
) on one side, unscrew and remove bolts
(
OD
) on the other side.
On the support select the holes right for the height desired,
then fit bolts (
OD
)
and screw nuts but do not tighten them.
Remove bolts (
OS
) and fit them into the holes corresponding
to those selected on the other side.
Screw and tighten all bolts.
VERSION WITH WHEELS:
RAISE THE MACHINE SLIGHTLY FROM THE GROUND
Loosen bolts (
OS
) and on the support select the holes right
for the height desired, then fit and tighten bolts (
OS
).
PERFORM THE SAME OPERATION AT THE OTHER.
BLADES MUST NEVER TOUCH THE GROUND!
LEAVE AT LEAST 40 MM.
WORKING HEIGHT ADJUSTMENT
OD
BNE 14
SL
P
C
B
A
OD
