AGRICULTURAL MACHINERY MANUFACTURERS
14
04.09.2009
INSTRUCTIONS
FOR SKIDS, ROLLER, WHEELS ASSEMBLY
Whenever the machine is delivered with skids, roller and wheels not mounted because of shipping
requirements.
Before connecting the machine to the tractor,
make sure the transmission unit
is equipped with oil drain plug (T).
For shipping requirements the machine may be shipped in vertical position; in
such a case, a blind plug is fitted on the transmission unit
so as to avoid oil overflow.
Therefore, replace the fitted plug with the drain plug contained in the proper
packing joined to the machine.
BNE 6
T
In order to use the machine with roller or wheels, mount side guards (SL),
according to
rules.
Skids assembly:
Make use of holes (
A
) on the lateral sides.
On the skids, select the proper holes so as to get up
the machine from the ground, at the height required.
See page 17.
Mount
the safety bar (
B
) on the rear side.
Roller assembly:
Make use of the pair of holes (
V
) on the lateral sides.
On the roller support, select the proper holes so as
to get up the machine from the ground, at the height
required. See page 17.
Mount
guards (
SL
) on the lateral sides.
Wheel unit assembly:
Make use of the pair of holes (
V
) on the lateral sides.
On the wheel support, select the proper holes so as
to get up the machine from the ground, at the height
required. See page 17.
Mount
guards (
SL
) on the lateral sides.
Mount
the safety bar (
B
) on the rear side.
In order to use the machine with skids or wheels, mount the bar (B) which determines
the rear safety distance required by
rules.
A
V
Wheels herein described are
mounted laterally and are not
steering: therefore, track can not be
controlled.
SL
A
B
