![Nobel aelios Technical Manual Download Page 29](http://html1.mh-extra.com/html/nobel/aelios/aelios_technical-manual_1697749029.webp)
7
7.
In case of two collectors, first place the left one, lifting the collector’s upper and lower fixing washers
8
. When
the collector is placed under, we slightly tighten the M8 screws and nuts with the collector’s fixing washers
8
in order to temporarily restrain it and easily center it with the system. Place the mechanically tightened unions
Ø22 at the collector’s edges.
6.
In case of installation of a three collectors system, we place the 2
extra support bases of a 1 collector system, installing them in the
same way, on the left and the right side of the existing support
base. On the three support bases, we place the three collectos
according to the following instructions. We use the mechanically
tightened union Ø22ΧØ22 in order to connect the collectors
and tighen.
8.
Join the second collector and
tighten the union*.
9.
Screw on the two supports
7
of the tank.
Tighten all screws on the base.
5.
Bend the straight parts
6
of step 2 with the hand covering the beams of the tiled roof. Drill and fasten up with
bolts. Use level so that the base is horizontally placed.
Solar water heaters
29
28
Solar water heaters - AELIOS
Solar water heaters - AELIOS