1
2
1
1
2
2
3.1
5
8
5
2.1
100mm
100mm
4
4
6
SUPPORT BASE ASSEMBLY ΟΝ ΑΝ INCLINED SURFACE
3.
In case of two collectors model, place the collector supporting part
5
on bottom part and between the gaps of it we
place the four collector’s fixing washers
8
and tight the M8 screws with the nuts.
In case of one collector model you don’t need to use part
5
. The collector is going to be fixed with the 2 collectors’
fixing washers
8
as it is described at the 3.1 balloon.
4.
Repeat for the top part.
2.
Place part
4
between the two Π shape parts
constructed in the former step 1 in order for
the frame to be formed. Screw straight parts
6
(which will be used for the mounting of the
support base to the tiles) to the bottom part.
Repeat for the rest of the parts.
1.
Screw part
1
to part
2
, using the M8 screws and nuts included in the packaging.
Repeat for the second pair.
ATTENTION!
In case the support base open-
ing is of 700mm, manually cut the extra length
of part
4
(100mm from each side, see 2.1) and
use the inner pair of holes.
ATTENTION!
After the installation check that the collectors surface has a tilt angle to the horizontal position of geo-
graphical latitude ±5°.
Solar water heaters
29
28
Solar water heaters - AELIOS
Solar water heaters - AELIOS
