07/01/06 Rev 1.0
Page 20 of 24
28.
Upgrading the NetCom firmware
With the NetCom Update software program you can upgrade the firmware for the:
•
OSD
•
Manager
•
RICCs
NetCom Update enables you to add new features and fix bugs in a quick and efficient manner.
You can install the NetCom Switch Update on any computer, even one not part of the NetCom system.
The NetCom Update software and latest firmware is on the NLS website. To obtain the latest firmware
for your system go to
www.NLSdisplays.com/support/NetCom
.
29.
System requirements for the NetCom Update software
•
Pentium 166 or higher with 16 MB RAM and 10 MB free Hard Drive space.
•
Free
Serial
port.
•
Windows 98 and later.
30.
Connecting the NetCom system
To update the firmware the NetCom system must be connected and switched on.
31.
Connecting the RS232 Serial cable
To run the software, connect the RS232 Serial cable to the computer containing the software, and to the
NetCom Switch..
32.
Installing the software
To install the NetCom Switch Update
software, simply download the software to your computer and run
the installer.
